Cables & Wires
Power cables, winding wires, conductors, conduit systems and photovoltaic cables requiring ISI mark certification.
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v
IS 694 (2010)
Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v
IS 1554: Part 1 (1988)
Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables
IS 7098: Part 1 (2025)
Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts
IS 7098: Part 1 (1988)
Aertal bunched cables - For working voltages up to and including 1100 Volts
IS 14255 (1995)
Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type)
IS 398: Part 4 (1994)
Aluminium conductors for overhead transmission purposes
IS 398: Part 2 (1996)
Aluminium Conductor for Overhead Transmission Purposes
IS 398: Part 2 (2025)
Aluminium conductors for overhead transmission purposes
IS 398: Part 1 (1996)
Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors
IS 398: Part 6 (2021)
Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground
IS 16205: Part 24 (2017)
Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc
IS 17505: Part 1 (2021)
Elastomer insulated cables with limited circuit integrity when affected by fire
IS 16246 (2015)
Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts
IS 17048 (2018)
Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV
IS 1554: Part 2 (1988)
Crosslinked polyethylene insulated thermoplastic sheathed cables
IS 7098: Part 2 (2011)
Elastomer insulated flexible cables for use in mines
IS 14494 (2019)
Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.
IS 17293 (2020)
Aluminium conductor for overhead transmission purposes
IS 398: Part 5 (1992)
Cable Trunking and Ducting Systems for Electrical Installations: Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling
IS 14927: Part 2 (2001)
Cable trunking systems and cable ducting Systems for electrical installations Part 2-1: particular requirements cable trunking systems and cable Ducting systems intended for mounting on walls and ceilings first revision
IS 14927: Part 2: Sec 1 (2023)
Copper Wire Rods for Electrical Applications — Specification ( First Revision )
IS 12444 (2020)
Cross - Linked polyethylene insulated thermoplastic sheathed cables
IS 7098: Part 3 (1993)
Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV
IS 9968: Part 2 (2002)
Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts
IS 9968: Part 1 (1988)
Flexible cables for lifts and other flexible connections
IS 4289: Part 2 (2000)
Low carbon galvanized steel wires, formed wires and tapes for armouring of cables
IS 3975 (1999)
Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced
IS 398: Part 3 (1976)
Specification for flexible cables for lifts and other flexible connections: Part 1 elastomer insulated cables
IS 4289: Part 1 (1984)
Low-Voltage switchgear and Controlgear: Part 4-2 Contactors and Motorstarters semiconductor motor controllers starters and Soft starters
IS/IEC 60947: Part 4: Sec 2 (2020)
Multicore and symmetrical pair / quad cables for digital communications: Part 5 symmetrical pair / quad cables with transmission characteristics up to 1000 MHz - Horizontal floor wiring - Secal specification
IS 14493: Part 5 (2018)
Specification for particular types of winding wires: Part 2 solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
IS 13730: Part 2 (2018)
Specification for shot firing cables (For Use Other Than In Shafts)
IS 5950 (1984)
Specification for wrought aluminium wire for electrical purposes
IS 2067 (1975)
Specifications for Particular Types of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision )
IS 13730: Part 27 (2018)
Cables & Wires FAQs
Which Cables & Wires products need BIS certification?
Certko currently tracks 49 notified Cables & Wires products, each mapped to its IS standard. Open any product to see its QCO status — mandatory, upcoming or voluntary — along with HSN code and applicable order.
How much does BIS testing cost for Cables & Wires products?
Reported laboratory test charges in this category range from ₹1K – ₹25L (excluding GST), depending on the standard, the lab and the number of models tested. Annual BIS marking fees apply on top and are listed on each product page.
How long does BIS certification take for Cables & Wires?
Most Cables & Wires applications complete in 8-14 weeks, covering documentation, sample testing at a BIS-recognised lab and, for ISI licences, the factory inspection.
Can Certko manage the whole process for my Cables & Wires product?
Yes — our consultants handle standard mapping, application drafting, lab coordination and inspection readiness end-to-end. Request a free quote and we respond within 24 hours.
Trusted by Global Brands
Kamicka
Ang India
Albchrome
Borosil Scientific
SEAH
MapmyIndia
Toshiba
Flipkart
OPPO
Thermadyne
Alborg
GursoygrupKamickaAng IndiaAlbchromeBorosil ScientificSEAHMapmyIndiaToshibaFlipkartOPPOThermadyneAlborgGursoygrupClient stories
What teams say about Certko
A fresh selection of client stories each visit.
“Certko showed me the exact IS standard, real lab prices and a shortlist of labs near my warehouse in one evening. The certification quote I got through them was 30% below what I had been offered elsewhere.”
“After the Toys QCO, we were lost. Certko's team mapped our full range to the right standards, coordinated testing and we had our ISI licence before the enforcement deadline.”
Need a quote for Cables & Wires?
Certko helps with scheme mapping, lab coordination and filings for India and export markets. Ask for a free quote — we reply within 24 hours.