Search product for certification
Check the right certification — search by product, IS, HSN or QCO.Match the right certification to your product. Search IS standard, HSN code, QCO status, marking fees, lab test cost range and approved laboratories in one place.
Choose a path
Certification solutions
Match your product to the right mark — start below, then search by product name or HSN.
- BIS CertificationRequired in India — map your product to the right ISI / CRS path and IS standard.
- BEE CertificationRequired in India for energy-related appliances under star labelling.
- Mandatory QCOProducts already under a Quality Control Order — search the notified list.
- Global marketsCE, FCC, GMARK, SABER and more — schemes for the EU, US, GCC and Saudi Arabia.
- Product categoriesBrowse products by category, then match the certification that applies.
1,494 products found
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements
IS 17017: Part 2: Sec 1 (2020)
- HSN
- —
- Labs
- 3
- Test cost
- ₹2.2L – ₹4.2L
- Marking fee
- —
Electronic Type Fan Regulators — Specification ( First Revision )
IS 11037 (2019)
- HSN
- 85049090
- Labs
- 3
- Test cost
- ₹25K – ₹30K
- Marking fee
- ₹46K/yr
Explosive atmospheres: Part 18 equipment protection by encapsulation "M"
IS/IEC 60079: PART 18 (2014)
- HSN
- —
- Labs
- 3
- Test cost
- ₹79K – ₹1.5L
- Marking fee
- —
Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T"
IS/IEC 60079: PART 31 (2013)
- HSN
- —
- Labs
- 3
- Test cost
- ₹69K – ₹84K
- Marking fee
- —
FIRE RESISTING RECORD PROTECTION CABINETS SPECIFICATION Second Revision of IS 14203
IS 14203 (2023)
- HSN
- 84241000
- Labs
- 3
- Test cost
- ₹2.1L – ₹7.5L
- Marking fee
- ₹91K/yr
Fabricated Polyethylene Fittings for Water Supply – Specification
IS 8360 (2022)
- HSN
- 39172190
- Labs
- 3
- Test cost
- ₹10K – ₹15K
- Marking fee
- ₹46K/yr
Fasteners - Single coil rectangular section spring lock washers specification
IS 3063 (1994)
- HSN
- —
- Labs
- 3
- Test cost
- ₹8K – ₹10K
- Marking fee
- —
Fibre cement flat sheets
IS 14862 (2000)
- HSN
- 68118990
- Labs
- 3
- Test cost
- ₹78K – ₹1.9L
- Marking fee
- ₹46K/yr
Fire-Resistance Tests - Elements of Building Construction Part 8 Specific Requirements for Non-load Bearing Vertical Separating Elements
IS/ISO 834: Part 8 (2002)
- HSN
- —
- Labs
- 3
- Test cost
- ₹3.5L – ₹5L
- Marking fee
- —
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel
IS 15769 (2008)
- HSN
- 83112000
- Labs
- 3
- Test cost
- ₹25K – ₹28K
- Marking fee
- ₹1.7L/yr
Food For Special Medical Purpose Intended For Infants – Specification
IS 17945 (2022)
- HSN
- 19011090
- Labs
- 3
- Test cost
- ₹85K – ₹1.4L
- Marking fee
- ₹1.3L/yr
Free cutting brass bars, rods and section
IS 319 (2007)
- HSN
- —
- Labs
- 3
- Test cost
- ₹3K – ₹8K
- Marking fee
- —
Groundnut oil
IS 544 (2014)
- HSN
- —
- Labs
- 3
- Test cost
- ₹5K – ₹20K
- Marking fee
- —
Gypsum Plaster Boards Specification Part 1 Plain Gypsum Plaster Boards
IS 2095: Part 1 (2023)
- HSN
- 68091100
- Labs
- 3
- Test cost
- ₹40K – ₹2.8L
- Marking fee
- ₹51K/yr
HOUSEHOLD REFRIGERATING APPLIANCES CHARACTERISTICS AND TEST METHODS Part 1 General Requirements
IS 17550: PART 1 (2021)
- HSN
- 84181090
- Labs
- 3
- Test cost
- ₹2L – ₹2.6L
- Marking fee
- ₹9.4L/yr
Hexagon head bolts screws and nuts of product grades A and B Part 2 Hexagon head screws (Size range M1.6 to M64 ) (Sixth revision of IS 1364 (Part 2))
IS 1364: Part 2 (2023)
- HSN
- 73181500
- Labs
- 3
- Test cost
- ₹10K – ₹15K
- Marking fee
- ₹46K/yr
Hexagon head bolts, screws, and nuts of property grades A and B: Part 1 Hexagon head bolts (Size range M1.6 to M64)
IS 1364: Part 1 (2023)
- HSN
- 73181500
- Labs
- 3
- Test cost
- ₹10K – ₹15K
- Marking fee
- ₹46K/yr
High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement
IS 16651 (2017)
- HSN
- 72210090
- Labs
- 3
- Test cost
- ₹39K – ₹21.5L
- Marking fee
- ₹78K/yr
Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume
IS 17550: PART 3 (2021)
- HSN
- 84181090
- Labs
- 3
- Test cost
- ₹1.3L – ₹1.9L
- Marking fee
- ₹9.4L/yr
Household and Similar Electrical Appliances - Safety - Particular Requirements for Commercial Refrigerating Appliances and Ice-Makers with an Incorporated or Remote Refrigerant Unit or Motor-Compressor (IEC 60335-2-89: 2019, MOD)
IS 18689 (2024)
- HSN
- —
- Labs
- 3
- Test cost
- ₹58K – ₹2.5L
- Marking fee
- —
Household electric direct - Acting room heaters - Performance requirements
IS 369 (2019)
- HSN
- 85162900
- Labs
- 3
- Test cost
- ₹13K – ₹20K
- Marking fee
- ₹1L/yr
Hydraulically Regulated Door Closers
IS 3564 (2025)
- HSN
- 83024190
- Labs
- 3
- Test cost
- ₹20K
- Marking fee
- ₹84K/yr
INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558
IS 15558 (2024)
- HSN
- 84191110
- Labs
- 3
- Test cost
- ₹13K – ₹16K
- Marking fee
- ₹95K/yr
Iron castings with spheroidal or nodular graphite
IS 1865 (1991)
- HSN
- 73259910
- Labs
- 3
- Test cost
- ₹9K – ₹10K
- Marking fee
- ₹68K/yr
Junction Boxes for Photovoltaic Modules Safety Requirements and Tests
IS 16911 (2023)
- HSN
- —
- Labs
- 3
- Test cost
- ₹4.5L – ₹11.5L
- Marking fee
- —
Marking fees are indicative annual BIS Standard Mark fees for large units (small and micro units pay reduced slabs — see each product page). Test costs are reported lab charges excluding GST. Verify current fee schedules with BIS before budgeting.
Product Database FAQs
How do I find out if my product needs BIS certification?
Search the table by product name, IS standard number or HSN code. Each entry shows the QCO status: 'Mandatory' means you need certification before selling, 'Upcoming' means a deadline has been notified, and 'Voluntary' means the ISI mark is optional.
What does the test cost range on each product mean?
It is the real reported sample-testing charge range across BIS-recognised laboratories approved for that standard, excluding GST. Total certification cost additionally includes BIS application and marking fees, which are listed on each product page.
What is the difference between marking fee and testing charges?
Testing charges are paid to the laboratory for sample testing. The marking fee is an annual fee paid to BIS for using the Standard Mark, and it varies by unit size — large, medium, small and micro enterprises pay different slabs.
My product is not in the list. Does that mean BIS is not required?
Not necessarily. New Quality Control Orders are notified frequently. Check the Upcoming QCOs page, or send us the product details through the contact form — we will map it to the correct standard within 24 hours, free.
Trusted by Global Brands
Kamicka
Ang India
Albchrome
Borosil Scientific
SEAH
MapmyIndia
Toshiba
Flipkart
OPPO
Thermadyne
Alborg
GursoygrupKamickaAng IndiaAlbchromeBorosil ScientificSEAHMapmyIndiaToshibaFlipkartOPPOThermadyneAlborgGursoygrupClient stories
What teams say about Certko
A fresh selection of client stories each visit.
“After the Toys QCO, we were lost. Certko's team mapped our full range to the right standards, coordinated testing and we had our ISI licence before the enforcement deadline.”
“SABER and GMARK hand-offs used to stall our shipments. Certko’s team kept both tracks moving and we cleared customs without last-minute surprises.”
Looking for a certification and compliance partner?
Certko helps with scheme mapping, lab coordination and filings for India and export markets. Ask for a free quote — we reply within 24 hours.