Search product for certification
Check the right certification — search by product, IS, HSN or QCO.Match the right certification to your product. Search IS standard, HSN code, QCO status, marking fees, lab test cost range and approved laboratories in one place.
Choose a path
Certification solutions
Match your product to the right mark — start below, then search by product name or HSN.
- BIS CertificationRequired in India — map your product to the right ISI / CRS path and IS standard.
- BEE CertificationRequired in India for energy-related appliances under star labelling.
- Mandatory QCOProducts already under a Quality Control Order — search the notified list.
- Global marketsCE, FCC, GMARK, SABER and more — schemes for the EU, US, GCC and Saudi Arabia.
- Product categoriesBrowse products by category, then match the certification that applies.
1,485 products found
Geosynthetics – — Geogrids used in reinforced soil retaining structures – Specification
IS 17373 (2020)
- HSN
- 59119090
- Labs
- 1
- Test cost
- ₹12.2L
- Marking fee
- ₹1.4L/yr
Geosynthetics – — Geotextiles used in subgrade stabilization in pavement structures – Specification
IS 16362 (2020)
- HSN
- 59119090
- Labs
- 1
- Test cost
- ₹3.7L
- Marking fee
- ₹1.6L/yr
Geosynthetics – — Needle punched nonwoven geobags for coastal and waterways protection – Specification
IS 16653 (2017)
- HSN
- 59119090
- Labs
- 1
- Test cost
- ₹1.2L
- Marking fee
- ₹1.2L/yr
Glass feeding bottles
IS 5168 (2018)
- HSN
- 39241090
- Labs
- 1
- Test cost
- ₹24K
- Marking fee
- ₹1.1L/yr
Glass reinforced polyester dough moulding compounds
IS 13411 (1992)
- HSN
- —
- Labs
- 1
- Test cost
- ₹26K
- Marking fee
- —
Glazed stoneware pipes and fittings
IS 651 (2007)
- HSN
- 69060000
- Labs
- 1
- Test cost
- ₹10K
- Marking fee
- ₹67K/yr
Ground granulated blast furnace slag for use in cement, mortar and concrete
IS 16714 (2018)
- HSN
- 26190090
- Labs
- 1
- Test cost
- ₹15K
- Marking fee
- ₹1.5L/yr
Grouts for Filling of Joints of Tiles and Stones
IS 17190 (2020)
- HSN
- 32149090
- Labs
- 1
- Test cost
- ₹22K
- Marking fee
- ₹1.7L/yr
HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - BALL AND ROLLER BEARING STEELS ( First Revision )
IS 17111 (2025)
- HSN
- 72241000
- Labs
- 1
- Test cost
- ₹12K
- Marking fee
- ₹99K/yr
Hair oils
IS 7123 (2019)
- HSN
- 33059011
- Labs
- 1
- Test cost
- ₹3K
- Marking fee
- ₹47K/yr
Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 6 Hammers
IS 4665: Part 2: Sec 6 (2023)
- HSN
- —
- Labs
- 1
- Test cost
- ₹1.2L
- Marking fee
- —
Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular requirements Section 1 drills and impact drills
IS 4665: Part 2: Sec 1 (2023)
- HSN
- —
- Labs
- 1
- Test cost
- ₹1.2L
- Marking fee
- —
Hand-held motor-operated electric tools - Safety - Part 2 Particular requirements Section 2 screwdrivers and impact wrenches
IS 4665: Part 2: Sec 2 (2023)
- HSN
- —
- Labs
- 1
- Test cost
- ₹1L
- Marking fee
- —
Heat - Treated steels, alloy steels and free - Cutting steels - Ball and roller bearing steels
IS 17111 (2019)
- HSN
- 72241000
- Labs
- 1
- Test cost
- ₹13K
- Marking fee
- ₹99K/yr
Hermetic compressors
IS 10617 (2018)
- HSN
- 84143000
- Labs
- 1
- Test cost
- ₹21L
- Marking fee
- ₹11.3L/yr
High Strength Structural Nuts
IS 6623 (2004)
- HSN
- 73181500
- Labs
- 1
- Test cost
- ₹6K
- Marking fee
- ₹48K/yr
High density polyethylene (HDPE) woven sacks for packing pesticides – Specification
IS 8069 (1989)
- HSN
- —
- Labs
- 1
- Test cost
- ₹7K
- Marking fee
- —
High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives
IS 16581 (2018)
- HSN
- 63053300
- Labs
- 1
- Test cost
- ₹13K
- Marking fee
- ₹1.3L/yr
High tensile strength flat rolled steel plate (Up To 6 Mm), sheet and strip for the manufacture of welded gas cylinder
IS 15914 (2011)
- HSN
- 72085190
- Labs
- 1
- Test cost
- ₹9K
- Marking fee
- ₹71K/yr
Horizontal Centrifugal Pump for Clear, Cold Water Part 2 General Purpose (Other than Agricultural and Rural Water Supply) –
IS 6595: Part 2 (2024)
- HSN
- 84137010
- Labs
- 1
- Test cost
- ₹6K
- Marking fee
- ₹65K/yr
Horizontal centrifugal pumps for clear, cOld water: Part 2 general pmUrpose (Other than agricultural and rural water supply)
IS 6595: Part 2 (1993)
- HSN
- 84137010
- Labs
- 1
- Test cost
- ₹6K
- Marking fee
- ₹65K/yr
Hot - Dip zinc coatings on structural steel and other allied products
IS 4759 (1996)
- HSN
- 72085110
- Labs
- 1
- Test cost
- ₹4K
- Marking fee
- ₹53K/yr
Hot Rolled And Cold Rolled Steel Strips Intended For Processing Of Semifully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel Specification
IS 18316 (2023)
- HSN
- 72251100
- Labs
- 1
- Test cost
- ₹11K
- Marking fee
- ₹83K/yr
Hot rolled carbon steel sheet, plate and strip
IS 1079 (2017)
- HSN
- 72083990
- Labs
- 1
- Test cost
- ₹6K
- Marking fee
- ₹86K/yr
Hot rolled carbon steel strip for cold rolling purposes
IS 11513 (2017)
- HSN
- 72083990
- Labs
- 1
- Test cost
- ₹4K
- Marking fee
- ₹59K/yr
Marking fees are indicative annual BIS Standard Mark fees for large units (small and micro units pay reduced slabs — see each product page). Test costs are reported lab charges excluding GST. Verify current fee schedules with BIS before budgeting.
Product Database FAQs
How do I find out if my product needs BIS certification?
Search the table by product name, IS standard number or HSN code. Each entry shows the QCO status: 'Mandatory' means you need certification before selling, 'Upcoming' means a deadline has been notified, and 'Voluntary' means the ISI mark is optional.
What does the test cost range on each product mean?
It is the real reported sample-testing charge range across BIS-recognised laboratories approved for that standard, excluding GST. Total certification cost additionally includes BIS application and marking fees, which are listed on each product page.
What is the difference between marking fee and testing charges?
Testing charges are paid to the laboratory for sample testing. The marking fee is an annual fee paid to BIS for using the Standard Mark, and it varies by unit size — large, medium, small and micro enterprises pay different slabs.
My product is not in the list. Does that mean BIS is not required?
Not necessarily. New Quality Control Orders are notified frequently. Check the Upcoming QCOs page, or send us the product details through the contact form — we will map it to the correct standard within 24 hours, free.
Trusted by Global Brands
Kamicka
Ang India
Albchrome
Borosil Scientific
SEAH
MapmyIndia
Toshiba
Flipkart
OPPO
Thermadyne
Alborg
GursoygrupKamickaAng IndiaAlbchromeBorosil ScientificSEAHMapmyIndiaToshibaFlipkartOPPOThermadyneAlborgGursoygrupClient stories
What teams say about Certko
A fresh selection of client stories each visit.
“The product testing pages made scope and sample size obvious before we requested a quote. When we did, the proposal matched what we had already budgeted.”
“CE plus Indian BIS for the same product line felt impossible until Certko reused test evidence intelligently. One project plan, two markets.”
Looking for a certification and compliance partner?
Certko helps with scheme mapping, lab coordination and filings for India and export markets. Ask for a free quote — we reply within 24 hours.