Electrical & Electronics

IT hardware, consumer electronics and electronic components covered under CRS registration and ISI marking.

168 notified productsTypical timeline: 6-12 weeks

Electrical & Electronics BIS certification

Information technology equipment - Safety: Part 1 general requirements

IS 13252: Part 1 (2010)

₹25K – ₹1.9L52 labs

Audio, video and similar electronic apparatus - Safety requirements

IS 616 (2017)

₹1 – ₹1.8L45 labs

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes — Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

IS 16046: Part 2 (2018)

₹40K – ₹4.8L32 labs

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

IS 15885: Part 2: Sec 13 (2012)

₹20K – ₹1.9L31 labs

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements

IS 16333: Part 3 (2022)

₹10K – ₹53K30 labs

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

IS 16102: Part 1 (2012)

₹13K – ₹1L29 labs

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires

IS 10322: Part 5: Sec 1 (2012)

₹25K – ₹1.0L24 labs

Luminaires Part 5: Particular requirements Section 1: Fixed general purpose luminaires

IS 10322 (Part 5/Sec 1) (2026)

₹20K – ₹1.5L19 labs

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes — Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

IS 16046: Part 1 (2018)

₹40K – ₹3.4L19 labs

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

IS 16242: Part 1 (2014)

₹35K – ₹1.9L19 labs

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV

IS 1180: Part 1 (2014)

₹45K – ₹11.5L17 labs

Luminaires Part 5: Particular requirements Section 2: Recessed luminaires and recessed air-handling luminaires

IS 10322 (Part 5/Sec 2) (2026)

₹20K – ₹1.5L16 labs

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

IS 16270 (2023)

₹3.2L – ₹19.5L16 labs

Uninterruptible power systems UPS Part 1 Safety requirements

IS 16242: Part 1 (2025)

₹45K – ₹22.5L16 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 1 General requirements

IS 7834: Part 1 (1987)

₹4K – ₹12K16 labs

Led modules for general lighting: Part 1 safety requirements

IS 16103: Part 1 (2012)

₹25K – ₹72K15 labs

Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements

IS 16102 (Part 1) (2026)

₹20K – ₹1.3L15 labs

LED Modules for General Lighting Part 1 Safety Specifications

IS 16103: Part 1 (2025)

₹25K – ₹97K14 labs

Luminaires: Part 5 particular requirements: Sec 6 handlamps

IS 10322: Part 5: Sec 6 (2013)

₹30K – ₹88K14 labs

Luminaires: Part 5 particular requirements: Sec 7 lighting chains

IS 10322: Part 5: Sec 7 (2017)

₹25K – ₹62K14 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 8 Specific requirements for caps

IS 7834: Part 8 (1987)

₹2K – ₹8K14 labs

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

IS/IEC 60947: PART 3 (2020)

₹1.2L – ₹25.9L13 labs

Luminaires Part 5: Particular requirements Section 5: Floodlights

IS 10322 (Part 5/Sec 5) (2026)

₹4K – ₹1.5L13 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 3 Specific requirements for 90 degree elbows

IS 7834: Part 3 (1987)

₹4K – ₹8K13 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 4 Specific requirements for 90 degree tees

IS 7834: Part 4 (1987)

₹4K – ₹8K13 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 7 Specific requirements for unions

IS 7834: Part 7 (1987)

₹500 – ₹8K13 labs

Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies - Part 5: Specific Requirements for 45 degree Tees

IS 7834: Part 5 (1987)

₹4K – ₹8K12 labs

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers

IS/IEC 60947: Part 2 (2016)

₹1.2L – ₹48.0L12 labs

Low-Voltage Switchgear And Control Gear: Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

IS/IEC 60947: Part 5: Sec 1 (2016)

₹1.3L – ₹40.1L12 labs

Luminaires Part 5: Particular requirements Section 3: Luminaires for road and street lighting

IS 10322 (Part 5/Sec 3) (2026)

₹40K – ₹1.5L12 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 2 Specific requirements for 45 degrees elbows

IS 7834: Part 2 (1987)

₹4K – ₹9K12 labs

injection moulded PVC socket fittings with solvent cement joints for water supplies: Part 6 Specific requirements for sockets

IS 7834: Part 6 (1987)

₹4K – ₹8K12 labs

Low-Voltage switchgear and controlgear: Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

IS/IEC 60947: Part 4: Sec 1 (2018)

₹4.3L – ₹30L11 labs

Luminaires Part 5: Particular requirements Section 6: Handlamps

IS 10322 (Part 5/Sec 6) (2026)

₹20K – ₹1.5L11 labs

Luminaires Part 5: Particular requirements Section 7: Lighting chains

IS 10322 (Part 5/Sec 7) (2026)

₹20K – ₹1.5L11 labs

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires

IS 10322: Part 5: Sec 2 (2012)

₹25K – ₹75K11 labs

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting

IS 10322: PART 5: SEC 3 (2012)

₹30K – ₹1.0L11 labs

Luminaires: Part 5 particular requirements: Sec 5 floodlights

IS 10322: Part 5: Sec 5 (2013)

₹30K – ₹1.0L11 labs

Digital Television Receiver For Satellite Broadcast Transmission Specification

IS 18112 (2025)

₹1.2L – ₹4.3L10 labs

Fabricated pvc - U fittings for potable water supplies

IS 10124: Part 2 (2009)

₹1K – ₹14K10 labs

Luminaires: Part 5 particular requirements: Sec 9 rope lights

IS 10322: Part 5: Sec 9 (2017)

₹30K – ₹50K10 labs

Safety of power converters for use in photovoltaic power systems: Part 2 particular requirements for inverters

IS 16221: Part 2 (2015)

₹1.5L – ₹15.9L10 labs

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes — Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

IS 16047: Part 3 (2018)

₹35K – ₹4.5L10 labs

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles

IS 15627 (2022)

₹66K – ₹97K9 labs

Maximum Power Point Tracking Efficiency of Grid Connected Photovoltaic Inverters

IS 17980 (2022)

₹2.0L – ₹5.5L9 labs

Motors for submersible pumpsets

IS 9283 (2013)

₹1K – ₹30K9 labs

Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed

IS 1180: Part 3 (2021)

₹72K – ₹11.5L9 labs

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

IS 16169 (2019)

₹1L – ₹4.5L9 labs

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification"

IS 12615 (2018)

₹4K – ₹3.8L8 labs

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements

IS 16333: Part 3 (2017)

₹15K – ₹25K8 labs

Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing

IS/IEC 61730: PART 2 (2023)

₹8.2L – ₹20.4L8 labs

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes

IS 1293 (2019)

₹10K – ₹22K8 labs

Safety of Power Converters for use in Photovoltaic Power Systems Part 1 General Requirements

IS 16221: Part 1 (2016)

₹2.7L – ₹14.0L8 labs

ac STATIC TRANSFORMER OPERATED WATTHOUR METERS CLASS 02 S AND 05 S AND VAR-HOUR METERS CLASS 02 S 05 S AND 10 S

IS 14697 (2021)

₹37K – ₹4.9L8 labs

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

IS 13779 (2020)

₹11K – ₹2.1L8 labs

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

IS 16444: Part 2 (2017)

₹2L – ₹6.2L7 labs

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

IS/IEC 61730: PART 1 (2023)

₹1.9L – ₹5.1L7 labs

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing

IS/IEC 61730: PART 2 (2016)

₹8L – ₹19L7 labs

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

IS 16270 (2014)

₹75K – ₹17.9L7 labs

AC static direct connected watthour smart meter class 1 and 2

IS 16444 (2015)

₹2L – ₹9.4L6 labs

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters

IS/IEC 60947: Part 4: Sec 1 (2012)

₹1.6L – ₹32.6L6 labs

Luminaires Part 5: Particular requirements Section 4: Portable general purpose luminaires

IS 10322 (Part 5/Sec 4) (2026)

₹20K – ₹1.5L6 labs

Luminaires: Part 5 particular requirements: Sec 8 emergency lighting

IS 10322: Part 5: Sec 8 (2013)

₹33K – ₹68K6 labs

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

IS/IEC 61683 (1999)

₹1L – ₹1.4L6 labs

Switches for Domestic and Similar Purposes

IS 3854 (2023)

₹13K – ₹40K6 labs

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements

IS 14286: Part 1 (2023)

₹14.5L – ₹23.5L6 labs

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

IS 14286: Part 1: Sec 1 (2023)

₹14.4L – ₹23.8L6 labs

Bayonet lampholders

IS 1258 (2024)

₹10K – ₹22K5 labs

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval

IS 14286 (2010)

₹7L – ₹12.8L5 labs

Line Operated A.c. Motors For Submersible Pumpsets

IS 9283 (2024)

₹4K – ₹19K5 labs

Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units

IS/IEC 60947: PART 3 (2012)

₹4.5L – ₹34.1L5 labs

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

IS/IEC 61730: PART 1 (2016)

₹4.9L – ₹13.2L5 labs

Solar Flat Plate Collector

IS 12933 (Part 2) (2025)

₹6K – ₹15K5 labs

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

IS 14286: Part 1: Sec 2 (2023)

₹14.5L – ₹23.8L5 labs

All glass evacuated tubes solar water heating system

IS 16544 (2016)

₹35K – ₹1L4 labs

All-glass evacuated solar collector tubes

IS 16543 (2024)

₹6K – ₹15K4 labs

Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures "d"

IS/IEC 60079: Part 1 (2014)

₹1.2L – ₹2L4 labs

Led modules for general lighting: Part 2 performance requirements

IS 16103: Part 2 (2012)

₹38K – ₹3.1L4 labs

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices

IS/IEC 60947: Part 5: Sec 1 (2009)

₹1.3L – ₹24.3L4 labs

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction

IS/IEC 61730: PART 1 (2004)

₹2L – ₹2.5L4 labs

Photovoltaic (PV) Module Safety Qualification Part 2 Requirements for Testing

IS/IEC 61730: PART 2 (2004)

₹7L – ₹12.7L4 labs

Safety glass

IS 2553: Part 3 (2019)

₹68K – ₹75K4 labs

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 1 General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation

IS 13340: PART 1 (2024)

₹2.4L – ₹6.2L4 labs

Solar Flat Plate Collector

IS 12933: Part 1 (2025)

₹48K – ₹1L4 labs

Switched Socket-Outlets without Interlock for Fixed Installations- Particular Requirements ( First Revision )

IS 15787 (2025)

₹20K – ₹24K4 labs

Switches for domestic and similar purposes

IS 3854 (1997)

₹12K – ₹15K4 labs

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic PV modules Third Revision

IS 14286: Part 1: Sec 3 (2023)

₹14.5L – ₹23.8L4 labs

a.c. Motor Capacitors Part 1 General - Performance, Testing and Rating - Safety Requirements - Guidance for Installation and Operation ( Third Revision )

IS 2993: Part 1 (2024)

₹3.8L – ₹24.6L4 labs

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

IS 2993: Part 2 (2024)

₹3.6L – ₹29.5L4 labs

All glass evacuated solar collector tubes

IS 16543 (2016)

₹5K – ₹15K3 labs

Automotive vehicles - Pneumatic tyres i?or two and three - Wheeled motor vehicles

IS 15627 (2005)

₹71K – ₹74K3 labs

Digital Television Receiver for Satellite Broadcast Transmission Specification

IS 18112 (2022)

₹1.1L – ₹1.4L3 labs

Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements

IS 17017: Part 2: Sec 1 (2020)

₹2.2L – ₹4.2L3 labs

Electronic Type Fan Regulators — Specification ( First Revision )

IS 11037 (2019)

₹25K – ₹30K3 labs

Explosive atmospheres: Part 18 equipment protection by encapsulation "M"

IS/IEC 60079: PART 18 (2014)

₹79K – ₹1.5L3 labs

Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T"

IS/IEC 60079: PART 31 (2013)

₹69K – ₹84K3 labs

Junction Boxes for Photovoltaic Modules Safety Requirements and Tests

IS 16911 (2023)

₹4.5L – ₹11.5L3 labs

Low - Voltage switchgear and controlgear assemblies: Part 3 distribution boards intended to be operated by ordinary persons (Dbo)

IS/IEC 61439: Part 3 (2012)

₹3.3L – ₹5.2L3 labs

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function

IS/IEC 60947: Part 5: Sec 5 (2016)

₹7L – ₹18.1L3 labs

Luminaires Part 5: Particular requirements Section 8: Luminaires for emergency lighting

IS 10322 (Part 5/Sec 8) (2026)

₹20K – ₹85K3 labs

Multipurpose dry batteries

IS 8144 (2018)

₹13K – ₹1L3 labs

Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules

IS 12640: Part 2 (2016)

₹13.0L – ₹28.4L3 labs

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes — Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

IS 16805 (2018)

₹2.8L – ₹4.5L3 labs

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

IS 16822 (2019)

₹3.1L – ₹5L3 labs

Solar flat plate collector

IS 12933: Part 1 (2003)

₹35K – ₹1L3 labs

Specification for electronic weighing systems: Part 3 requirements

IS 9281: Part 3 (1981)

₹19K – ₹30K3 labs

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-4: Special requirements for testing of thin-film CuInGASSe2 based photovoltaic PV modules Third Revision

IS 14286: Part 1: Sec 4 (2023)

₹14.5L – ₹23.8L3 labs

AC static watihour meters, class 1 and 2

IS 13779 (1999)

₹975 – ₹2.0L2 labs

Connectors for d.c. Application in Photovoltaic Systems — Safety Requirements and Tests

IS 16781 (2018)

₹8.5L – ₹8.7L2 labs

Essential Requirement (s) for Security of CCTV

ER 01 (2024)

Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )

IS/IEC 60079: PART 0 (2017)

₹1.9L – ₹2.0L2 labs

Explosive atmospheres: Part 7 equipment protection by increased safety "E"

IS/IEC 60079: PART 7 (2015)

₹2L – ₹2.2L2 labs

Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment

IS 16659 (2017)

₹11K – ₹35K2 labs

Hexagon socket head cap screws

IS 2269 (2006)

LLow-Voltage Switchgear and Controlgear Part 5 Control Circuit Devices and Switching Elements Section 2 Proximity Switches ( First Revision )

IS/IEC 60947: Part 5: Sec 2 (2019)

₹15.6L – ₹22L2 labs

Low-voltage switchgear and controlgear assemblies Part 2: Power switchgear and controlgear assemblies

IS/IEC 61439: Part 2 (2020)

₹8.0L – ₹51.4L2 labs

Luminaires Part 5 Particular requirements Section 18 Luminaires for swimming pools and similar applications

IS 10322 (Part 5/Sec 18) (2026)

₹20K – ₹1.5L2 labs

Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire

IS 16107: Part 2: Sec 1 (2012)

₹50K – ₹1.0L2 labs

Photovoltaic PV Systems — Characteristics of the Utility Interface

IS/IEC 61727 (2004)

₹1L – ₹6.2L2 labs

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules

IS 12640: Part 1 (2016)

₹9.7L – ₹15.4L2 labs

Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses Rccbs: Part 1 general rules

IS 12640: Part 1 (2024)

₹5.1L – ₹15.4L2 labs

Sand Cast Iron Spigot And Socket Pipes, Fittings And Accessories – Specification

IS 1729 (2023)

Self-Ballasted LED Lamps for General Lighting Services Part 2 Performance Requirements Second Revision

IS 16102 (Part 2) (2026)

₹80K – ₹2.5L2 labs

Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification

IS 17018: Part 1 (2022)

₹80K – ₹90K2 labs

Solar flat plate collector

IS 12933: Part 2 (2003)

₹4K – ₹9K2 labs

Solar photovoltaic water pumping systems: Part 1 centrifugal pumps

IS 17018: Part 1 (2018)

₹34K – ₹80K2 labs

Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests

IS 9974: Part 1 (1981)

₹26K – ₹1.0L2 labs

Stationary cells and batteries, lead - Acid type (With Tubular Positive Plates)

IS 1651 (2013)

₹51K – ₹1.2L2 labs

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container

IS 13369 (1992)

₹51K – ₹1.0L2 labs

Switches for household and Similar fixed electrical installations Part 2-1: particular requirements electronic control devices

IS/IEC 60669: Part 2: Sec 1 (2021)

₹1.6L – ₹5.5L2 labs

Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 1 test requirements: Sec 1 special requirements for testing of crystalline silicon photovoltaic (Pv) modules

IS 14286: Part 1: Sec 1 (2019)

₹13.0L – ₹13.0L2 labs

Test procedure for thermosyphon type domestic solar hot water heating systems

IS 16368 (2015)

₹35K – ₹80K2 labs

A.C. motor capacitors

IS 2993 (1998)

AC static transformer operated, watthour and var - Hour meters, class 0.2 S and 0.5 S

IS 14697 (1999)

Carriers and bases in rewirable type electric fuses for voltages up to 650 v

IS 2086 (1993)

Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series

IS 1729 (2002)

Cycles - Lighting and retro - Reflective devices: Part 2 retro - Reflective devices

IS/ISO 6742: PART 2 (2015)

Data exchange for electricity meter reading, tarif and load control - Companion specification: Part 2 smart meter

IS 15959: Part 2 (2016)

Data exchange for electricity meter reading, tariff and load control - Companion specification: Part 3 smart meter (Transformer Operated KWh And KVarh, Class 0.2 S, 0.5 S And 1.0 S)

IS 15959: Part 3 (2017)

Double- Capped LED Linear Lamps Part1 Safety Specification

IS 16614: Part 1 (2018)

Electric Vehicle Conductive Charging System Part 2 Plugs Socket Outlets Vehicle Connectors and Vehicle Inlets Section 6 Dimensional compatibility requirements for DC pin and contact t

IS 17017: Part 2: Sec 6 (2021)

Electric Vehicle Conductive Charging System Part 2 Plugs, Socket — Outlets, Vehicle Connectors and Vehicle Inlets Section 2 Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories

IS 17017: Part 2: Sec 2 (2020)

Electric Vehicle Conductive Charging System Part 2 Plugs, Socket — Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

IS 17017: Part 2: Sec 3 (2020)

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure ''t''

IS/IEC 60079: PART 31 (2022)

Explosive atmospheres: Part 11 Equipment protection by intrinsic safety I""""

IS/IEC 60079: PART 11 (2011)

Instrument transformers: Part 1 general requirements

IS 16227: Part 1 (2016)

Instrument transformers: Part 2 additional requirements for current transformers

IS 16227: Part 2 (2016)

Lead - Acid storage batteries for motor vehicles

IS 7372 (1995)

Low-Voltage Fuses Part 2 Supplementary Requirements for Fuses for Use by Authorized Persons ( Fuses Mainly for Industrial Application ) –

IS/IEC 60269: Part 2 (2016)

Low-Voltage Switchgear and Controlgear Assemblies Part 1 General Rules

IS/IEC 61439: Part 1 (2011)

Low-Voltage Switchgear and Controlgear Assemblies Part 6 Busbar Trunking Systems (Busways)

IS/IEC 61439: Part 6 (2012)

Luminaires Part 1 General Requirements and Tests

IS 10322 (Part 1) (2026)

Luminaires: Part 1 general requirements and tests

IS 10322: Part 1 (2014)

Luminaries Performance Part 2 Particular Requirements Section 2 LED Street Lighting Luminarie

IS 16107: Part 2: Sec 2 (2017)

Multipurpose Dry Batteries Specification

IS 8144 (2025)

Self - Ballasted led lamps for general lighting services: Part 2 performance requirements

IS 16102: Part 2 (2017)

Self ballasted lamps for general lighting services: Part 1 safety requirements

IS 15111: PART 1 AND PART 2 (2002)

Shunt Power Capacitors of the Self-Healing Type for a.c. Systems Having a Rated Voltage up to and Including 1 000 V Part 2 Ageing Test, Self-Healing Test and Destruction Test

IS 13340: Part 2 (2024)

Shunt power capacitors of the non - Self - Healing type for ac systems having a rated voltage up to and including 1 000 v: Part 1 general - Performance, testing and rating - Safety requirements - Guide for installation and operation

IS 13585: Part 1 (2012)

Solar Cooker — Box Type — Specification Part 1 Requirements ( Second Revision)

IS 13429: Part 1 (2020)

Specification for driving squares for hand socket wrenches

IS 7214 (1974)

Starters for fluorescent lamps

IS 2215 (2006)

Stationary cells and batteries, lead - Acid type with plante positive plates

IS 1652 (2013)

Stationary valve regulated lead acid batteries

IS 15549 (2005)

Switches for Household and Similar Fixed Electrical Installations Part 2 Particular Requirements Section 2 Electromagnetic remote-control switches ( RCS )

IS/IEC 60669: Part 2: Sec 2 (2006)

Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application

IS 7538 (1996)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements

IS 2418: Part 1 (2018)

Utility - Interconnected photovoltaic inverters - Test procedure of islanding prevention measures

IS 16169 (2014)

Electrical & Electronics FAQs

Which Electrical & Electronics products need BIS certification?

Certko currently tracks 168 notified Electrical & Electronics products, each mapped to its IS standard. Open any product to see its QCO status — mandatory, upcoming or voluntary — along with HSN code and applicable order.

How much does BIS testing cost for Electrical & Electronics products?

Reported laboratory test charges in this category range from ₹1 – ₹51.4L (excluding GST), depending on the standard, the lab and the number of models tested. Annual BIS marking fees apply on top and are listed on each product page.

How long does BIS certification take for Electrical & Electronics?

Most Electrical & Electronics applications complete in 6-12 weeks, covering documentation, sample testing at a BIS-recognised lab and, for ISI licences, the factory inspection.

Can Certko manage the whole process for my Electrical & Electronics product?

Yes — our consultants handle standard mapping, application drafting, lab coordination and inspection readiness end-to-end. Request a free quote and we respond within 24 hours.

Trusted by Global Brands

Client stories

What teams say about Certko

A fresh selection of client stories each visit.

★★★★★

“Our listings were at risk after a QCO update. Certko confirmed the exact IS number, booked the lab and got us the certificate before enforcement — no delisting.”

SSneha P.Marketplace Seller, Pune

★★★★★

“GMARK categories were confusing until Certko mapped our catalogue to the right standards matrix. Clear next steps, clear costs — we certified on the first attempt.”

HHassan A.GCC Importer, Dubai

Need a quote for Electrical & Electronics?

Certko helps with scheme mapping, lab coordination and filings for India and export markets. Ask for a free quote — we reply within 24 hours.

Request a quote for this product Latest Blog